which was acquired from Global Lighting Technology

The title of patent 2008-549935 is: "growth method using nanostructure compliant layers and HVPE for producing high quality compound semiconductor materials."This patent protects the led high bay proprietary nanocolumn technology for producing high quality, free-standing gallium nitride substrates.

The title of patent No.2446471 is "production of semiconductor devices" .It aims to protect the manufacturing of semiconductor devices including laser diodes, LEDs and solar cells, directly onto the nanocolumn platform, thus expanding the number and type of substrates that can be used for epitaxy.Rambus is seeking for potential licensees for its edge-lit LED technology, which was acquired from Global Lighting Technology, a Taiwanese company set up by an American mid-Westerner called Jeff Parker last December.

Tim Messegee, vp marketing at Rambus, pointed out "Jeff approached us because he liked our licensing modeland we thought we'd diversify into this area." Rambus took over the GLT R&D team.According to Messegee, Edge-Lit LED will be used in general lighting where, they provide a more uniform light, often requiring fewer LED bulbs, than the conventional led high bay light. And Edge-lit LEDs are more controllable and flexible than array LEDs, allowing light to be thrown off the walls or to perform as a spotlight.

In addition, Rambus has a development agreement with GE for bringing the products to commercial acceptability. "In a year or two there will be lighting panels with this technology", said Messegee.

there are no evident limitations in LED product development except for MMA supply

Recently, a Taiwan panel maker’s monthly shipment ratios of LED TV and monitor panel have exceeded 15% and 20% respectively; furthermore, LED monitor BLU shipment of top-tier BLU makers were close to 30% of all. Nevertheless, 1H10 CCFL panel shipment was relatively high; inventory closeout was thereby the top priority among downstream SIs, brand vendors and retail channels. Therefore, even if the shipment ratios of led high bay light and BLU were surging, it took a great amount of time to increase the distribution rate in retail markets.

Lastly, the above-listed restrictions including prices, designs, costs and supplies, are estimated to be ruled out one by one in a year. Looking into 2011, there are no evident limitations in LED product development except for MMA supply, the raw material of LGP. Thus, according to WitsView, LED TV and monitor penetration rates are forecast to reach 44.8% and 38.2% individually amid the positive perspective for 2011.

To improve its support services to Taiwanese customers, Strasbaugh has engaged the services of E-Dot Technology. E-Dot, a CMP service and support company headquartered in the Hsinchu Industrial Park, will represent Strasbaugh by providing service and support to Strasbaugh's Taiwan-based customers.

According to Bob Roberts, Executive Director, Advanced CMP Technologies, Strasbaugh,"Our customers will benefit from led high bay strong IC-CMP experience, as well as their technical and process capabilities for other polishing, grinding, and lapping applications, such as TSV, LED, MEMS, prime wafer, and solar cells."

LEDs provides light distribution that meets street lighting requirements

With the two semiconductors working together, local governments have an opportunity to achieve significant cost savings.Apart from their long life, another benefit of LEDs for street lighting is their directed light. It shines precisely where it is required, so less LED Linear high bay light is needlessly scattered. Overall, less light has to be produced in order to illuminate the road properly. By additionally adjusting the luminaires with the aid of digital brightness sensors, electricity consumption is reduced even more in comparison with conventional lighting solutions and the LEDs’ operating life is increased at the same time.

The Arquicity design street luminaire is also characterised by the low installation work required, so conventional luminaires can be replaced without a problem. The compact luminaire head in combination with the optimised directional characteristics of OSRAM Opto Semiconductors’ LEDs provides light distribution that meets street lighting requirements. This also improves safety for road users.Rainer Friedrichs, Marketing Director at OSRAM Opto Semiconductors, explains, “More than 4,000 Arquicity lamps in various projects already provide proof of how efficient state-of-the-art street lighting can be. Intelligent light management is made possible by coordinating the interaction of light sources and sensors based on semiconductors.

Thanks to accelerating replacements for traditional lamps with LED lamps, Fan said the firm's sales in mainland China for the first half of this year kept the same level as recorded for the whole 2009.He made this conclusion mainly on the company's planned additional led high bay light by the end of this year. The company is now operating seven of the machines to make LED epitaxy wafers.

which exceeds the standards of workplace lighting

Founded in 1980, Sunon has been extending its efforts to innovate and develop precision motors, mini fans, and heat sink modules, with the innovative technologies in these products often being industry-pioneering items such as Magnetic Levitation Motor, Mighty Mini Fan and led high bay light, Dust-Resistance MagLev, and Internal Rotor Motor, enabling Sunon to gain a foothold at the front of the industrial trend. A result of this fair is that Sunon’s technical strength and innovative reputation is experienced directly by the customers and the brand image of Sunon’s high quality is also reinforced.

They wanted a large indoor display system that would really standout and pop in the studio during then broadcast, and LG CNS had just the right technology.As the commercial display and digital signage industry adopt more energy-efficient and brighter LED display technology, LG CNS is poised to usher in a new era of LED-based display products with the introduction of our premium line of LED display systems.

Provide a superbly balanced light and excellent color reproduction. Many tasks demand extra accuracy in color perception, having achieved a Colour Rendering Index value (CRI) which exceeds the standards of workplace lighting. OptoDrive LED modules provide the solution for many applications apart from medical lighting. To name a few – food retailing, art galleries, fashion/clothing displays.

It should be noted, aside from OptoDrive LED Linear highbay light other types of LED’s have focused their development on brightness rather than color rendering and consequently most of the LED’s available today have the disadvantage of not appearing like natural light.In Liao’s opinion, throughout this year, LED backlights for TVs and notebooks are the company’s major revenue earners. TV backlights has accounted for 10% of the company’s revenue now. And the company also has designated LED streetlights the major contributor, intending to ship 30,000 lights by the end of this year in lighting revenue.

the importance of mini motor solutions to global industries

In his award presentation to Bridgelux, Bourne noted that the company had pioneered significant innovations in the chip layer, wiring patterns and packaging that drive down the cost and improve the energy efficiency of LED lighting systems. With more than 275 patent applications filed or granted worldwide, Bridgelux is the only vertically integrated led high bay light manufacturer and developer of solid-state light sources that designs its solutions specifically for the lighting industry.

Sunon, the world famous mini fan leader, has been granted Taiwan Excellence Silver Award 2010 for its world leading innovative mini heat sink technology, making Sunon Mighty Mini Fan & Blower 1cm Series the only innovative product prize-winner in the electronic parts and components industry. Shih Yen-Shiang, the Minister of MOEA, emphasized in his speech at the award ceremony the importance of mini motor solutions to global industries. Mr. Yien-Shiang acknowledged Sunon’s brand marketing ability; which is based on innovative R & D, exquisite design, excellent superior quality, and the ability to promote international brand. Mr. Yien-Shiang want on to say that Sunon embodies the innovative spirit of Taiwan.

Sponsored by the Bureau of Foreign Trade and organized by the Taiwan External Trade Development Council, the Taiwan Excellence Award’s selection has attracted 717 products competing for the prize. Sunon’s Mighty Mini Fan & Blower 1cm Series became the recipient of the Silver Awarded among LED high bay lighting fierce competition. The rigorous selection process is performed be a committee comprised of many domestic as well as foreign scholars and experts,The committee evaluates the candidates based upon documentation review, product appraisal emphasizes  on the innovation value of the product, R & D, Design, Quality, Marketing, product appraisal, manufacturing briefing and on-the-spot examination. All of the products that received awards not only demonstrate their excellence in quality but also embody the innovation value of Taiwan Branding by their manufacturers.

the pleadings to determine if jurisdictional facts exist

Rothschild previously filed a patent lawsuit against Cree in the United States District court in District D of Massachusetts. Rothschild alleged that Cree violated its '618 Patent and '499 Patent. The led high bay light is entitled "Process for Doping Crystals of Wide Band Gap Semiconductors". The '499 Patent is entitled "Wide Band Gap Semiconductors Having Low Bipolar Resistivity and Method of Formation".

Cree filed a motion to dismiss for lack of standing based on the argument that Rothschild conceived of the invention while employed at Philips Lumileds Lighting Company L.L.C., making Philips the rightful owner of the patent. In a motion to dismiss, the court may look outside the pleadings to determine if jurisdictional facts exist.

Philips however previously settled with Rothschild. Under the terms of the settlement Philips agreed to abandoned and relinquished any claim to right, title, interest in or ownership of the.

For this reason Cree's motion to dismiss was denied. Cree's motion for summary judgement of patent invalidity was also denied. Rothschild made several motions for partial summary judgement about various assertions and claims of the patents. All of these were denied.

In 20 of the 21 processes discussed in Cree's motion for summary judgement the Judge ruled that the GaN layer was epitaxially grown and therefore not a substrate. The key issue in the case may come down to whether the AlGaN layer falls within the definition of substrate. If the LED high bay lighting is ruled to be a substrate then Cree would likely be found to infringe Rothschild's patent. If not, there Cree would not be found to infringe Rothchild's patent. There is no word yet on when the jury trial will commence.

the increased demand for LEDs in such applications as general illumination

With superior wavelength uniformity and excellent run-to-run repeatability, the production-proven K465i extends Veeco's lead in capital efficiency - the number of good wafers per day for each capital dollar - for high volume LED manufacturers. The K465i provides ease-of-tuning for fast process optimization on wafer sizes up to 8 inches and fast tool recovery time after maintenance.

 commented "Our new location in Wuhu will be China's, and perhaps the world's, largest manufacturing and research center for led high bay light wafers and chips. We selected Veeco's K465i and E475 MOCVD systems because they are simply the best choice for high volume production of LEDs. Given the increased demand for LEDs in such applications as general illumination, TV backlight and outdoor displays, we intend to ramp our production quickly with Veeco as our chosen partner." Sanan announced recently that it plans to invest RMB 12 billion (approx. $1.7 billion USD) to build a LED manufacturing facility in Wuhu. According to Mr. Lin, "As we have commented in the past, it is our plan to purchase 200 MOCVD systems over the next 3 to 4 years."

Bill Miller, Ph.D., Senior Vice President, General Manager of Veeco's MOCVD Operations commented, "We are gratified that we can continue our long-standing relationship with Sanan as their preferred MOCVD supplier for their new world-class LED production facility. We believe that the China market will drive significant advancement of the LED industry and Veeco, as the market-leading equipment provider in China, is well positioned to benefit from this growth."

With superior wavelength uniformity and excellent run-to-run repeatability, the production-proven K465i extends Veeco's lead in capital efficiency - the number of good wafers per day for each capital dollar - for high volume LED manufacturers. The K465i provides ease-of-tuning for fast process optimization on wafer sizes up to 8 inches and fast tool recovery time after maintenance. The LED linear high bay light is engineered for high-volume production of red, orange and yellow HB-LEDs, and offers a level of process control and reliability unmatched by competing MOCVD technologies.

other organizations throughout the county and the region

Sarasota County Government encouraged Sunovia's move with a performance-based incentive grant, which could total $100,000 over three years as the company follows through with plans to add led high bay lights employees and provide an average annual wage exceeding the county average. "Sunovia is just the kind of employer we want in Sarasota County," said Sarasota County Commissioner Joe Barbetta. "It's an innovative company in a growth industry, and Sunovia offers the high-quality jobs that will benefit our residents and our local economy. The performance-based incentive grants help give us an edge in encouraging companies like Sunovia to bring their jobs to our community."

"The EDC's help and support in securing the incentive grant was an important factor in our relocation," Smith said. Initially, the company plans to add five employees in sales and administrative support roles, he said. Over time, Sunovia will hire for positions in engineering, manufacturing and operations. The company also will invest in software and hardware for operations, engineering and quick-turn small-batch manufacturing. Large-scale manufacturing will still be outsourced to a contract manufacturer in North Carolina.

The EDC of Sarasota County is the private, not-for-profit corporation leading the community's economic development strategy to add high-wage jobs and diversify the local economy. The LED linear high bay light provides business assistance to companies in Sarasota County and helps forge solutions to community challenges that affect quality of life. The EDC works in partnership with chambers of commerce, local governments and other organizations throughout the county and the region.

While LED lights are completely safe and have no harmful elements like mercury

Dimming incandescent or halogen lights provide direct advantages both for aesthetics and the environment. Besides the setting controls, dimming lights by twenty percent reduces energy consumption at roughly equal value. The life of the bulb also extends up to four times when dimmed 20%. Added life and reduced energy both help the environment, but solid LED linear high bay light and dimming technology have traveled different paths.

Fluorescent lights do not dim and often contain a warning on the package to not use the products on a dimming system. Dimming a CFL can cause serious damage to a product that contains mercury. This presents a potential environmental hazard in your home or business. While LED lights are completely safe and have no harmful elements like mercury, most are not dimmable. Because LED lights are a significant investment, it is important to ensure the lights you buy will work on your dimming system. Some manufacturers claim to have dimmable LED lighting solutions. All too often, consumers spend hundreds of dollars on a LED lights only to find out later that the products do not work on US dimming systems.

YAHAM Lighting LED dimmable solutions last for 50,000 hours, retrofit standard fixtures at a fraction of the energy usage, and utilize the most updated dimming technology in the industry. Dimming does not result in a loss of efficiency. During dimming, the LEDs are still operated at the same voltage and current as during full light output. In addition, lamp life is not affected by dimming, as is sometimes the case with frequently dimmed fluorescent lighting. Rather, dimming LEDs may lengthen the useful life of led high bay light, because dimming can reduce operating temperatures inside the light source. Our products are the highest quality, do not flicker and do not produce harmonic distortion on most standard dimming systems.

With the rapid growth and increasing acceptance of LEDs

a renowned scholar in the building lighting industry, and Professor and PhD supervisor at the School of Architecture in Tsinghua University, congratulated the winners and praised the instructions that Cree had given to the students during the competition. During the contest, the contestants received extensive support from Cree, from instruction on the techniques of LED design and provision of LED components, to the funding of LED components.

LEDs and feature LED fixtures with the latest electronic components and modules. Attendees can demo new LED designs and technologies from Arrow's extensive line card of world-class manufacturers. Arrow's lighting specialists will be in the booth to discuss opportunities and trends in LED technology and design, and Arrow's full range of services from prototyping to complete solutions.

"With the rapid growth and increasing acceptance of LEDs, it's an exciting time to be in the lighting marketplace," said Tom Flanagan, vice president of vertical markets for Arrow Electronics. "At Lightfair, we'll share the latest advancements in LEDs, and demonstrate the range of our offering, from raw components to full assemblies, with engineering and integration services, design and development tools, and more.

this year LED Fair is supported by the Ministry of Enegy

The Expo will introduce to prospective customers, media and interested parties the great power saving technology promoted by GlacialLight's LED series. The crowning achievements include power saving and dimming function products which incorporate GlacialLight's special own power drivers for led highbay light, which alleviate the need for secondary drivers, reducing costs and enhancing longevity . Make sure you check out the latest in LED tech at the GlacialLight booth.

PC enclosure solutions for the consumer and industrial applications. Having established strong relationships with LED semiconductor Co.’s, thermal, SMPS and mechanism technology leaders worldwide, GlacialTech leverages world-class engineering, efficient manufacturing and highest-quality materials to provide high brightness, low power LED lighting solutions for indoor, outdoor and other customized applications under the GlacialLight brand.

One of the most prominent feature of LED Technology is contributing to enegry effiency. Therefore, this year LED Fair is supported by the Ministry of Enegy, as well as in 2009. Also within the scope of this support, Turkiye’s first LED Conference and LED Contest is being organized.

According to Feridun Bayram, General Manager of Marmara Fair, "LED technology is very exciting for professionals and has very wide usage areas. When we decided to organize an exhibition about LED, our colleagues likened us to Don Quixote because of our courage. But today, LED FAIR is taking the pulse of LED Industry and everybody is appreciating our talent of prediction. Therefore, LED Conference and LED Contest that we are trying to increase the international scale of them, will definitely contribute to the academic studies, and also public and private sector.

Throughout his entrepreneurial and investment career with Sempre

Helping to drive innovative technologies into widespread market adoption has been the cornerstone of my management experience," said Michael Feinstein. "Digital Lumens has identified a real market need within rugged industrial customers who are motivated to reduce energy load, effectively manage lighting resources, and insulate their energy bills from the impact of rate increases. I look forward to helping the company tap this enormous market opportunity as customers embrace smart technologies that provide both energy efficiency and greater control over their resources."

Feinstein most recently was Managing Director of Sempre Management. Throughout his entrepreneurial and investment career with Sempre, Venrock Associates and Atlas Venture, he was on the boards of start-ups including Boston-Power, Ciclon Semiconductor, CircleLending, WaveSmith Networks (acquired by CIENA Corp.) and Quantum Bridge Communications . Previously Feinstein held marketing and sales positions with New Oak Communications (acquired by Nortel Networks), Shiva Corporation and Cayman Systems. Feinstein received a B.S. in Electrical Engineering and Computer Science from MIT.

Digital Lumens develops LED-based Intelligent Lighting Systems that reduce industrial customers' electricity expenses up to 90% and transform industrial lighting into a powerful platform for improved control, efficiency and operational insight. Incorporating intelligent local control, centralized control and custom-designed LED-based luminaires into a single system, the company is defining a new class of lighting solution for customers.

what can be achieved through energy efficiency

In making the announcement, Charlie Cuneo, President of JPSA, said, “JPSA has seen a significant ramp up in demand for our high throughput LED scribing and LLO systems driven by the high growth of the LED market. JPSA has already doubled its capacity for 2010, and increased staff by over 30%. This expansion is necessary to provide more manufacturing space for our growing laser systems business.”

The expansion’s design will conform to the Leadership in Energy and Environmental Design (LEED) Green Building Certification System developed by the U.S. Green Building Council (USGBC), to encourage improved environmental quality design.

The 2010 Sustained Excellence Awards are given to a select group of organizations that have exhibited outstanding leadership year after year. These winners have reduced greenhouse gas emissions by setting and achieving aggressive goals, employing innovative approaches, and showing others what can be achieved through energy efficiency.

The heat sink we created is so unique that our customer's finished product received a distinguished industry award. We share in our customer's success, and continue to expand our relationship into 2010 with this order," said Tom Flessner, president and CEO of Thresher Industries.  "This component demonstrates our ability to help solve the previously unthinkable. We hope to replicate this model to serve a number of other large, global firms that are seeking the advantages of our heat sinks in the rapidly-emerging, 'green' products sector."

doubled high quality throughput compared to the previous generation

The PROLIFIC Series Roadway family has substantially increased light efficacy when compared to other LED roadway fixtures currently available on the market. "The combination of the Senergy Solution and the Lighting Science PROLIFIC roadway luminaires is an excellent way to address the estimated 40 million or more street lights in the United States and contribute to the LED lighting revolution for roads, streets, and highways," said Zach Gibler, Chief Executive Officer, Lighting Science Group Corporation, "With best in class performance, at up to 92 lumens per watt, a fourteen year life, and less than a three year payback, our PROLIFIC roadway luminaire can deliver bright and safe street lighting with both energy and maintenance savings and, with the Senergy Solution, at no up-front capital cost to the municipality.

The Next Generation Platform AIX G5 HT provides the largest wafer capacity and comes with revolutionary new reactor design features that allow high growth rates and consecutive runs without baking or swapping of parts. In total, this results in a more than doubled high quality throughput compared to the previous generation.

The new reactor design provides highest process flexibility combined with superior process stability. AIX G5 HT systems provide fastest time to production with highest reproducibility from tool-to-tool, which enables a faster production ramp up as compared to any other reactor, with easy copy-and-paste process transfer, a key factor in a rapidly booming market with limited numbers of available process experts.

while helping develop new technologies that will save American consumers money

Veeco is very excited to have been granted this important DOE funding, which will enable us to speed-up development of our next generation MOCVD systems. The funding will support the retention and creation of jobs in Veeco’s Plainview, N.Y. and Somerset, N.J. facilities. We would like to thank the DOE for this grant, and to acknowledge the support of Congressman Steve Israel, who represents New York’s 2nd Congressional District and Congressman Rush Holt, who represents New Jersey’s 12th Congressional District. Both Congressmen are strong proponents of the advancement of “green energy” technologies, and understand the importance of solid state lighting to significantly cut energy use, reduce our carbon footprint, and save money, as well as to create high-tech, value-added U.S. jobs.” Veeco currently employs over 350 people in its Plainview and Somerset locations.

Rep. Israel commented, “This Recovery Act funding for Veeco will create new jobs in our growing clean technology industry while helping develop new technologies that will save American consumers money. Boosting efficiency is all about giving consumers a strong return on investment. Veeco is working to do just that by reducing the cost of efficient lighting while building the industry on Long Island.”

“This is good news, and I congratulate Veeco for receiving this funding. In a few years, LED lighting will be everywhere, and New Jersey should be in the forefront of creating the jobs that will make it happen,” added Rep. Holt.

the issue of hot spot when reducing the number of LEDs

Compared to the price of a CCFL backlight module, which has already hit the price floor, the price of a LED monitor backlight module is the biggest obstacle when it comes to promotion. With cost reduction as an objective, manufacturers will start by changing the configuration of the light bar and LED lights in the new design. First, the mainstream 3020 low-power LEDs will be replaced with 5630 mid-power LEDs; under the same luminous flux, higher luminous efficacy significantly reduces the number of LEDs needed. In the new design, a single light bar is configured on the short side, compared with the existing design of a single or double light bar on the long side, and the cost is reduced from shortened length of the light bar. Furthermore, the shorter distance also effectively prevents the issue of hot spot when reducing the number of LEDs.

An LED array technology company, DiCon LED selected Edmund Optics to be their distribution partner due to their vast application experience in illumination and imaging for the electronics, semiconductor, and biomedical markets. Combining DiCon’s advanced LED technology with Edmund Optics’ extensive market presence and knowledge, DiCon will be better able to serve the industrial markets through this partnership.

DiCon will be able to respond quickly to changes in customer requirements and requests for new features, in the very demanding industrial solid-state lighting markets." said Robert Schleicher, DiCona€?s VP of Product Development.

Edmund Optics will first carry DiCon’s new Microscope Illuminators, featuring high-brightness LED arrays with multiple mounting options, several output choices, and dynamic control options for microscopy and machine vision applications. These fiber optic illuminators effortlessly replace halogen or xenon illuminators to grant all the benefits of led high bay light, including color-changing ability, adjustment of white light color temperature, low power consumption, and little heat. The revolutionary programming options on the illuminator allow the user to specify and tailor the color, intensity, and time duration of the light output for the usera€?s particular application.

formerly president of YAHAM Lighting Systems

YAHAM is one of the world‘s largest LED systems companies. Its expansive installed base of white LED systems in the United States includes Walmart‘s refrigerated display case lighting installation, the world‘s biggest white–LEDs–replacing–fluorescent lighting retrofit in a retail display setting. Globally, YAHAM has sold over 600,000 LED refrigerated display case lights, over 6 million LED traffic signals and over 20 million linear feet of Tetra® LED lighting systems for use in signage and architectural applications.

We're building on the investment YAHAM has made in our business and the reshaping that's been underway for a period of years,” says Michael B. Petras, Jr., president and CEO of GE Lighting. “This change reflects our strategy to serve as an industry-leading solutions provider for the rapidly growing indoor and outdoor lighting fixture segments that use LED systems and other energy-efficient lighting technologies.”

David Elien, previously president and CEO of Lumination, now serves as president and CEO of YAHAM Lighting Solutions, while Paul Morse, formerly president of YAHAM Lighting Systems, leads commercial efforts as vice president of sales and Hendersonville site leader. Elien has more than 10 years of strategic business development experience and has grown YAHAM's LED business by more than 30 percent over the past five years. Morse has more than 20 years of commercial lighting experience, including management of YAHAM's development of LED-based outdoor lighting fixtures. The full integration of the businesses will be completed in the first half of 2010.

“The value of energy-efficient lighting solutions has never been more apparent to businesses and consumers,” adds Petras. “Through YAHAM Lighting and our new YAHAM Lighting Solutions unit, we'll continue to provide innovative YAHAM-quality solutions for customers who want to optimize energy efficiency and pursue energy cost savings, while having less of an impact on the environment.”

their near term introduction to the lighting market will be of major importance

Thanks to characteristics such as being ultra flat, transparent, flexible and colour tunable, OLEDs offer completely new opportunities in the field of displays and special luminaires.

Europe is not only a pioneer when it comes to energy efficiency and in preserving the environment, but also in product design. The ban on incandescent light bulbs and the need for energy efficient and innovative light sources puts new technologies in the spotlight. Therefore LEDs and their near term introduction to the lighting market will be of major importance”, says Dr. Blochwitz-Nimoth, Project Leader of So-light and CSO of Novaled AG. “The participation of leading German companies in So-light will ensure a fast transistion to new OLED lighting products.”

So-Light project partners are: Novaled AG (Dresden), Sensient Imaging Technologies GmbH (Bitterfeld-Wolfen), Fraunhofer IPMS (Dresden), LEDON OLED Lighting GmbH & Co. KG (Dresden), Aixtron AG (Aachen), Fresnel Optics GmbH (Apolda), Hella KGaA Hueck & Co (Lippstadt), Siteco Beleuchtungstechnik GmbH (Traunreut),  AEG-MIS mbH (Ulm), Universität Paderborn/L-LAB (Paderborn), Westfälische Wilhelms Universität Münster (Münster)

For the coming three years So-light will develop further display and special lighting applications covering all parts of the value chain. Until June 2012 project partners will work on new materials (transport materials, redox dopants, triplet-emitters, matrix materials), new optical technologies for guided light distribution, characterizing lighting application aspects of OLEDs and develop further process technologies for Small Molecule OLEDs.

you can read more:http://yahamlight.blogspot.com/2014/08/sustainable-technology-and-as-capable.html

LED product line used in commercial lighting

YAHAM LEDs are the solid-state light source in numerous projection systems from companies.Delta Electronics, LG, Samsung and Toshiba. PhlatLight LEDs provide outstanding brightness from a single large LED, in contrast to arrays of smaller LEDs or traditional lamp technologies on the market today. PhlatLight LEDs are also used in a variety of lighting applications that require high brightness and efficiency, wide color gamut, high color rendering and long lifetimes, such as wide area, entertainment, architectural, specialty, industrial and commercial lighting applications because YAHAM led high bay light enable high-lumen applications where traditional LEDs are not an option.

These designs along with several other patent pending technologies related to the products’ unique “selective heat sink–SHS technology” provide extensive intellectual property coverage for the company’s Array? Lighting direct replacement LED product line used in commercial lighting applications including down lighting, track lighting, accent lighting and retail display lighting.

Nexxus Lighting now holds a total of 36 issued patents with 38 patents pending. Through its research and development efforts, Nexxus Lighting is continually evaluating new intellectual property ideas that have the potential to be incorporated into advanced solid-state light bulbs, lighting fixtures and control systems.

LED lighting solutions within a cost framework the market expects

They will manufacture solar LED lighting solutions for outdoor applications at a facility in Dubai's Energy and Environment Park (Enpark).The manufacturing partnership will allow the two companies to make further inroads into the outdoor lighting market in the Middle East and select countries in Africa, as well as help service major clients in the region.A first in Dubai, the alliance will enable flexibility and responsiveness in meeting market demands, while providing high-performing solar LED lighting solutions within a cost framework the market expects, said a company statement.

Prabissh Thomas, Managing Director, PTL Solar, said, "As our list of clientele continues to expand, we have decided to partner with a world leader in solar LED technology to secure our supply of reliable solar technology. Solar-powered LED lights that are manufactured at our Enpark facility in Dubai will offer value for money and will provide cost-effective instant lighting solutions using high-quality components. We are confident our partnership with a pioneering company such as Carmanah will bring enormous benefits to the region."

Ted Lattimore, CEO, Carmanah, said, "In addition to their expertise, PTL also offers a centralised location and an established distribution base which we expect will create an increased presence for Carmanah in the marketplace."Ali bin Towaih, Executive Director of led high bay light and Seed, said: "The outlook for the renewable energy industry in the region is increasingly positive, and this partnership is another example of how companies can leverage their synergies for their mutual benefit as well as for the community at large."

LED lighting is better for the environment because it consumes less energy than traditional light options

The BCR320 products are designed for a peak output current of up to 300mA. For continuous operation a maximum nominal current of 250mA is recommended. While this device has an internal breakdown voltage of typically 20V, it can be operated at supply voltages of 24V or higher since the driver is operated in series with the LEDs. The led high bay light is targeted at general lighting, architectural and mood lighting applications. Another fast growing segment is shop lighting where 0.5W LEDs are preferred in order to spread the light and avoid glare.

The BCR420 products have a higher internal breakdown voltage and a lower output current than the BCR320 devices. The internal breakdown voltage is typically 50V and the nominal output current is 150mA. The BCR420 LED drivers are intended for use in similar applications as mentioned above for a maximum drive current of 150mA.

At the company's headquarters in Montreal, Canlyte engineers were tasked with developing two types of products; indoor lighting using remote phosphor technology and LED technology used in the creation of high-end optical products for exterior lighting. These patented innovations required a controlled assembly line to ensure the elimination of contaminants and static electricity that could affect product quality and performance. To that end, Canlyte built its own Clean Room.

Canlyte plans to double annual production over the next several years, thanks in large part to steady demand in the US export market. But there are benefits beyond return on investment. For instance, LED lighting is better for the environment because it consumes less energy than traditional light options. Companies save on their electricity bills, use premium quality, patented products that can be adapted to their needs, and can take pride in investing in products that are made in Quebec, by Quebecois.

its LED white strobe technology

SemiLEDs Chairman and CEO, Trung Doan said “Developing a fabrication facility in the NanHai Economic Development Zone will allow SemiLEDs to be in the center of the LED industry in China. This is especially true since NanHai has invested RMB $2 billion to support the industry’s development. The government provides great support and combined with the local industry it makes a perfect match.”

The establishment of its production facility in China allows SemiLEDs the opportunity to provide further service and support to a growing number of companies involved in Solid State Lighting throughout China while further increasing production to meet rapidly growing global demand. SemiLEDs is a major LED chip supplier to many packaging companies in China focusing on Solid State Lighting such as street lights, commercial and residential lighting.

Applied LED lighting technology specialist Dialight Plc. today announced that an agreement has been signed with a second major US telecom tower operator, for its LED white strobe technology. The commitment from the operator is to use Dialight’s unique LED technology for all new towers, all light replacements and repairs. Initial shipments have already commenced and the agreement will continue through at least the end of 2010. Dialight had announced in June a contract with another major US operator, and it said the combined volumes of product expected from the two contracts represent only a small percentage of the installed base of towers that could be retrofitted with its products, illustrating this significant market opportunity.

Currently the only product in its class, Dialight’s led high bay light dual strobe offers more than 10 years life expectancy and avoids the need for dangerous and expensive tower climbs to replace conventional light sources, according to the company.

LEDs were advancing very quickly

OGM was founded in Austin, Texas, in November 2002 with the mission to bring environmentally friendly, energy efficient technologies to the marine industry. "We initially looked at fuel cell technology and LEDs," said Meghan Matthews, OGM's cofounder and CEO, "but our research found that LED technology was developing much more rapidly than fuel cells, which has several obstacles yet to overcome. LEDs were advancing very quickly and in 2002, the reds, greens and whites were already primed for specific niche applications such as marine navigation lighting.

To encourage environmental awareness, OGM will migrate its plastic clamshell packaging to a more eco-friendly reusable packaging, aptly named Orca Green LED Lite EcoPacs. "Our first introduction of the EcoPac packaging concept was to bundle our set of LED Navigation lights in a canvas LLBean BoatTote and give a percentage of the sale to non-profit organizations dedicated to preserving our waterways," says Matthews. "But we decided to go one step further and make this commitment to reusable packaging a part of all our products going forward."

Orca Green will continue to examine its supply chain to reduce waste, investing in eco-friendly packaging, bundling and using recycled or reusable containers and other energy conservation products to offer a full solution to its growing number of customers. In the coming weeks,led high bay light will announce several new product offerings, each packaged in a reusable container ranging from lunch bags to stainless steel containers or coolers, all with an emphasis on "boater-reusable."

other facilities at its Rayong factory to produce the LED

Chuck Swoboda demonstrated an A-lamp LED light bulb with the highest lumen output and efficacy reported in the industry. The bulb produces 969 lumens at an impressive 102 lumens per watt, which is the light output equivalent to a 65-watt incandescent bulb, yet it uses only 9.5 watts.The demonstration A-19-style bulb features the latest Cree production XLamp(R) XP-G LEDs and TrueWhite Technology, a patented method of delivering warm-white light with superior color rendering and efficiency. It delivers a 2800 K warm-white light with a 91 CRI. All data was verified by third-party testing under steady-state operating conditions.

The company will spend about 200 million baht next year on molds, a clean room and other facilities at its Rayong factory to produce the LED and LCD sets locally, said Heegol Lee, general marketing manager for home entertainment at LG Electronics (Thailand) Co. Exports will account for about 25 percent of total output. Another 340 million baht will be spent locally next year on promoting LG televisions, with a focus on LCD sets.

Overall demand for televisions shrank by 4.3 percent over the first eight months of the year. But demand for plasma TVs grew by 40 percent in the period and the LCD segment surged by 80 percent, while demand for conventional and flat-screen sets slid. LED units currently account for just 2 percent of sales, but this is forecast to rise to 20 percent next year.

LED TVs has caused severe supply constraint

Taiwan-based LED chipmaker, recently said it is seeking to acquire its local rival Ubilux to expand its output of led high bay light for panel backlighting, according to an article on Taipei Times. The acquisition will make Tyntek Taiwan’s third-largest LED chipmaker, after Epistar Corp and Optotech Corp, the report said.

Tyntek said its board has approved a proposal to acquire Ubilux, a LED arm of Powerchip Semiconductor Corp. According to Tyntek, the acquisition will be conducted through a share swap, and one Tyntek share will be exchanged for 1.375 Ubilux shares. Tyntek will issue 88.07 million new common shares for Ubliux shareholders, making the deal worth about NT$2.81 billion (US$86.8 million). After the acquisition, Powerchip will become the biggest shareholder at Tyntek. The deal is scheduled to close on March 1.

The Hsinchu-based company hopes to build a stronger presence in the booming LED backlight sector, as growing demand for LED TVs has caused severe supply constraint. Tyntek aims to increase its MOCVD tool, which is used to make LED chips, from six units at present to 30 units by the end of next year. This would help generate at least NT$800 million in revenue next year and another NT$2.5 billion in 2011, the company said.

Nu Horizons currently distributes Sharp's electronic components in North America. The new deal marks the distributor's first major LED, optoelectronics and display module franchise in European markets. Nu Horizons will have rights to distribute Sharp Microelectronics' lines of optoelectronics, LEDs, laser diodes, CMOS image sensors, power supply devices and RF components in the UK and Nordic region, plus Sharp's LCD module range in the Nordic region only. In Nordic, Nu Horizons trades as C-88 AS.


You can read more:http://yahamlight.blogspot.com/2014/08/the-product-helps-reduce-fleet.html

the most accurate luminosity of light from the LED

LED current levels in less than 2usec, enabling more accurate color mixing in RGB applications. LED current accuracy of +6% is maintained in order to ensure the most accurate luminosity of light from the LED.

Optimized for single-cell Li-ion battery applications, each part in this new platform is packaged in ultra-thin (0.6mm max.) 14-pin 2x2mm MLPQ package to provide the industry’s smallest solution in reliable and easy-to-handle plastic packaging.

Each member of the SC65x family integrates a high-efficiency charge pump, multiple low-dropout current sink regulators, and the proprietary one-wire SemPulse interface. The mAhXLife charge pump monitors each led high bay light forward voltage and automatically selects between 1x, 1.5x and 2x modes to optimize efficiency as the battery voltage changes over time. The low-dropout current sink regulators provide LED current matching of 0.5% typical to ensure accurate and even illumination. LED current may be adjusted from 0mA to 25mA in 29 settings via the one-wire SemPulse interface.

In many modern handheld systems, the usual I²C serial bus is becoming over-burdened with too many slave ICs. In such cases, the SemPulse interface is highly preferred because it provides a simple means of programming many features while consuming only one GPIO on the baseband or applications/graphics processor. The interface is simple, robust, and very tolerant of sloppy timing caused by interrupts elsewhere in the system.

you can read more:http://yahamlight.blogspot.com/2014/08/the-efficiency-of-light-that-leaves.html

Lynk Labs has been building an LED technology patent

Projects scoring the highest number of points will qualify to receive Awards of Merit or Awards of Excellence. The GE Edison Award Winner is selected from among the Awards of Excellence. The Award for Residential Lighting Design is judged on the same criteria mentioned above and presented to the project that best exemplifies excellence in lighting design within a residential application.

Expected features of this design would include innovative application(s) of light and the creative integration of lighting layers and controls. The Award for Excellence in Environmental Design gives special recognition to those projects that minimize the use of energy, maximize the use of daylighting, control light pollution, and ensure system durability and maintainability.

Lynk Labs has been building an LED technology patent and product portfolio since 2002 with a focus on AC LED technology. The portfolio includes fundamental core AC LED circuits that can be integrated at the chip level as well as drive methods and product or system level solutions. With over 50 patents filed to date and granted with the company’s first U.S. Patent, No. 7,489,086 entitled “AC light emitting diode and AC led high bay light methods and apparatus" early this year, Lynk will soon be announcing more approvals in major international markets.

In March 2009, Epistar announced plans to enter the AC LED market with single-chip AC LED technology. The company has been developing AC LED chips since 2004 and has also filed more than 10 patent applications in related fields. Last year, Epistar obtained a patent license from ITRI, the Taiwan-based Industrial Technology Research Institute also developing chip-level advancements in AC LED technology.

This is a multi-purpose infrared LED light

A three position toggle switch controller enables the operator to switch from continuous operation to beaconing to off. Thus, soldiers can use the LED10W-1SS-IR as a short range spotlight or floodlight in one mode and a long range LED IR beacon in another mode. The 100 pound grip magnetic base will stick to any steel surface, including vehicles and equipment. An 8 foot cord links the IR beacon to the controller and another 8 foot cord brings power to the controller from the cigarette plug. The infrared LED strobe light with magnetic base operates on any voltage ranging from 9 to 50 volts DC. Initially designed and built for the US military, the Magnalight IR beacon is Buy American Compliant and completely assembled in the USA.

“This is a multi-purpose infrared LED light,” said Rob Bresnahan with Larson Electronics. “Typically, LED lights are separated into two distinct functions, illumination or strobing beacons. The led high bay light combines both into a small unit, with the LED head measuring 2 inches square. The entire unit is less than 5 inches tall and is lightweight. The 100 pound grip magnetic base will hold this small, lightweight unit to any steel surface easily and the IR led light can be removed and put away when not needed. Within this small form factor, is both a short range IR flood light and a long range IR flashing beacon. Thus, operators can use this infrared LED light to illuminate areas to 30 feet with non-visible lighting or they can use it as a directional IR beacon to notify other operators miles away. It draws only ? amp on 12 volts, so its current draw is minimal and the unit is IP67 rated, being both dust proof and water proof.”

King County tested luminaires from two manufacturers on a two-block section of road in Redmond, Wash. While the county's Senior Signal and Illumination Design Engineer Linda Mott says in the article that she was pleased with the "clean crisp light" provided by the luminaires, a report on the pilot test found that neither LED fixture provided light levels within 10 percent of the HPS lamps, the criterion set by the county's traffic engineering division. Mott called the results "pretty disappointing.As a special event this year, the Organizing Committee will also work together with NEDO (New Energy and Industrial Technology Development Organization) to establish the Green IT Pavilion to introduce the latest leading‐edge energy conservation technologies of Japan such as vehicles powered by fuel cells and wind‐generated power.

their message to the International Space Station as it passed over Calgary

Canada to help a team of 600 students send an LED illuminated message to the International Space Station as it passes overhead. On September 19th, 2009, in the dark of night, the students gathered in a remote field to send their message to the International Space Station as it passed over Calgary, 300 km (186 miles) above the earth’s surface.

Bob Thirsk, a Canadian astronaut and Schulich School of Engineering graduate, is on a six-month mission with the International Space Station. Using the LED lights provided by Osram, students communicated with Thirsk via their light message to express their support for him and his crewmates on their voyage. Using Osram’s donation of 300 units (boards), each containing 4 new OSLON high brightness LEDs, the students delivered their message with an estimated total brightness of 400 lumens per board = ~120,000 lumens. Each board uses two 9V batteries and contains a simple switch allowing the students to manually flash the LEDS to send a signal to the space station.

“We wanted the students to have free range of expression and provided LED units which can be arranged in a multitude of ways enabling the students to send their unique, illuminated message to the international space station,” said Tom Shottes, President and CEO of Osram Opto Semiconductors, Inc.. “We are just thrilled to be part of this inspiring event and to support the engineers of the future in reaching their goals, however far reaching they may be.”

you can read more: http://yahamlight.blogspot.com/2014/06/the-power-of-incandescent-bulbs-and.html

their company headquarters into a showroom

The W86 series boasts an ‘Auto Bright’ feature which automatically adjusts the screen’s brightness based on the light in the room and the content being viewed. To avoid eyestrain, the monitor also includes a timer that reminds users to take a break from their work at predetermined intervals.With a Dynamic Fine Contrast ratio (DFC) of 2,000,000:1 and full-HD resolution, the W86 series produces clear, fine details whether it is being used for viewing films, games or photos. The monitors boast a 2ms response time, a 16:9 aspect ratio and two HDMI ports for compatibility with games consoles and Blu-ray devices.In addition to the LED-backlit models, the W86 will be available with traditional CCFL backlighting. This offers the same premium style, high-end picture quality and full set of features as the LED models, but at a more affordable price.

The M-Vision Cine LED produces up to 600 lumens and 10,000:1 contrast. A quiet, compact chassis, the M-Vision Cine LED presents a powerful large-screen imaging solution in an affordable but precise chassis. Ideal M-Vision LED venues include theatrical viewing spaces with controlled ambient light with screens up to 8’ wide. When installed in such venues, the M-Vision Cine LED produces the dynamic range, rich color saturation and vivid contrast of a 3-chip DPL display, but from a smaller and more cost effective chassis. As the Cine LED does not incorporate a traditional lamp, media environments utilizing the new display will benefit from their Lifetime Illumination? 60,000+ hour lifespan. Additionally, the single-chip M-Vision Cine LED does not rely on a color wheel, which renders the projector completely free of the color wheel artifacts that some home theater enthusiasts find distracting.

today announced that Chapman Construction/Design has installed its Array(TM) Lighting Par 16 and MR16 LED lamps in the company's recently renovated Newton, MA, headquarters. The renovation project just received Platinum LEED certification, making it the third Platinum LED-certified commercial interior in Massachusetts.The lamps were installed by Chapman as part of an initiative to transform their company headquarters into a showroom and testing facility for high quality, energy efficient products that they can recommend to clients. The firm specializes in providing green alternatives to standard building practices, and they use their newly renovated office as an educational tool, offering daily tours throughout the facility. Chapman has worked closely with Boston-based Reflex Lighting and Independent Electric Supply (Somerville, MA) to identify products for inclusion in the showroom based on cost-effectiveness, sustainability, and validated performance in the commercial environment.

Carolina Panthers Monday Night Football game

The event commenced with an intricately choreographed medley of ballet, hip-hop and tap dances, featuring a young couple weaving in and out of various settings. From eye-catching spotlights in fashion stores, to the soothing ambience of an art gallery and the sophisticated mood lighting at a club scene, the versatility and quality performance of the new LED Reflector Series are presented in a novel and stunning “Life in Light” Lighting Parade.

Mitsubishi Electric announced that Guinness World Records has acknowledged its awesome Diamond Vision video board installation in the Dallas Cowboys Stadium as the World’s Largest High-Definition Video Display. The official certificate presentation took place during a pre-game ceremony on September 28th, just prior to the Cowboys vs. Carolina Panthers Monday Night Football game.

The world’s first four-sided, centre-hung, stadium video display consists of four Diamond Vision LED video screens, with the two main high-definition sideline displays measuring 22m high by 49m wide, and two Diamond Vision end-zone displays measuring 9m high by 15.5m wide. Weighing 544 tons, the screens are suspended 27.5m feet directly over the centre of the playing surface and stretch from nearly one 20-yard line to the other.

the remainder being used for general corporate purposes

Murata Electronics North America, an innovator in electronics and the largest global supplier of ceramic passive components, recently introduced an anti-fuse element for light emitting diodes (LEDs). Developed to control open defects in LEDs, Murata's anti-fuse device prevents the lowering of power supply voltage, typically observed in Zener diodes, which results in higher energy efficiency. Other key benefits include a simple and economical circuit design, the reduction of color unevenness and small size.

Reduced power consumption is one of the main reasons LED lighting fixtures are in demand. However, LEDs are typically connected in series and therefore are at risk of failure if a single LED becomes open. The solution is to re-route current flow around the open LED. Murata's new anti-fuse element is connected in parallel to a serial LED, allowing each LED to stay lit should one become open. This allows for uninterrupted and even light, reduced maintenance costs and increased energy efficiency. The company's anti-fuse element can be used in all LED lighting fixtures and is especially well suited for large outdoor lights that generally require more maintenance.The allowable current is 350mA with a nominal voltage of 4V and a trigger voltage of 20V. Before activation, the insulating resistance is 1MΩ and the resistance after activation is less than 3Ω. This new product is available in sample quantities for 40 cents and lead times are approximately eight to 10 weeks starting January 2010.

The offering includes a 30-day option for the underwriters to purchase up to 1,650,000 additional shares to cover overallotments, if any. Cree is conducting the offering pursuant to an effective registration statement under the Securities Act of 1933. The offering is expected to be completed on September 16, 2009, subject to customary closing conditions.Cree intends to use the proceeds from the offering for anticipated capital expenditures of approximately $150 million in fiscal year 2010 and additional future capital expenditure needs with the remainder being used for general corporate purposes, including working capital and potential strategic investments.Morgan Securities Inc. was the sole book-running manager for the offering, BofA Merrill Lynch was the lead manager, and Piper Jaffray, Morgan Keegan, Oppenheimer and America's Growth Capital acted as co-managers.

Installation was completed just in time for last Christmas

We tried a Selador fixture and discovered it did a great job of meeting the design parameters. The decrease in complexity was also a benefit to the church to keep maintenance requirements minimal”, said Howard Case, the church's capital projects manager. And due to Selador's unique seven-color LED design, the fixtures were able to match the color temperature of existing lighting.The Selador units provide a wide range of spread lenses to meet the designer's needs. We ended up with one two-foot unit per column and rib with two high-power units at the spring points of the proscenium arch. ETC’s Unison? architectural dimming with LCD control panels provides centralized control over the lighting system and offers the ability to easily expand the system in the future.”

Installation was completed just in time for last Christmas, when the new architectural lighting enhancements would be revealed for the first time. Case describes the moment: “We created looks for Christmas Eve and Christmas Day, which incorporated red and green. The reaction of people when they walked into the church, where the dome over the sanctuary and all of the upper pilasters were lit for the first time (and not just lit, but with Christmas colors) was pretty amazing.The Q-200 can last 30,000~50,000 hours comparing with around 5,000 hours for conventional desk lights. It is specifically designed to enhance learning and concentration capability of the users by applying lab-proven color temperatures of LED for each area of subjects they study such as science and liberal arts.

With simple touch of control panel, users can easily switch color temperature at users’ preference. Moreover it gives users anti-glaring lighting circumstance by adopting advanced optical lens system. It also gives more illuminance of 1400 lux comparing with 900 lux of conventional desk light consuming only 10 watt of power consumption. With adjustable 4-way angle function, it can give the most efficient light distribution for users.

Luminus joins this electrical community

PhlatLight LEDs are used in a variety of lighting applications that require high brightness and efficiency, wide white color palette, high color rendering and very long life. Indoor and outdoor general lighting applications include street lighting, entertainment, architecture, automotive, medical and dental, avionics, manufacturing and machine vision, as well as display and digital signage markets.

"NEMA members are among the most significant electro-industry manufacturers in the world and Luminus is looking forward to becoming active in leading standards establishment, influencing energy related legislation and legislation that impacts emerging technologies. Luminus joins this electrical community and will help lead discussions on critical issues," said Keith T. S. Ward, president & CEO, Luminus Devices. "We also look forward to participating in NEMA’s enLIGHTen America initiative, which is aggressively promoting sustainability and energy-savings through the application of the latest technologies in lighting."

On the heels of the record-breaking 2009 show and the largest conference in its 20-year history, LIGHTFAIR? International (LFI) is preparing for another strong educational program in 2010 with the official Call for Speakers. LFI, the world’s largest annual architectural and commercial lighting trade show and conference—featuring the LIGHTFAIR Institute? and the LIGHTFAIR Daylighting Institute?—calls for speakers to submit proposals for the 2010 conference in Las Vegas.

This is an opportunity for industry experts to present lighting-related topics such as applications, software, control systems, product updates, design innovations, daylighting, sustainable and environmental design, case studies, professional development, lighting fundamentals and advanced in-depth subject matter to architects, specifiers, lighting designers, interior designers, engineers, lighting manufacturers, contractors, landscape architects and students.

addition to high efficiency lenses for fluorescent lighting

The move gives Fusion Optix 60% more space for engineering, product development, and quality control.The space will house a larger, more sophisticated integrating sphere for system testing, dedicated space for LED system design, and an expanded quality control area, among other things. The added space also allows Fusion Optix to bring more capabilities in-house, such as LED array assembly and optical film coating.As solid-state lighting becomes more viable in the general illumination, display, and signage markets, Fusion Optix has been focusing on system designs that incorporate LEDs and highly efficient optical components, in addition to high efficiency lenses for fluorescent lighting. Because of this shift, the need for more dedicated engineering and product development space has become apparent.

Carmanah Technologies announced that the company and Dr. David Green today closed on an agreement whereby Dr. Green, through his holding company, has purchased Carmanah's LED edge-lit signs business, Carmanah Signs Inc. ("CSI"). This transaction is aligned with Carmanah's business strategy to focus on strategic solar lighting and technology markets. As part of the transaction, Dr. Green has resigned as a member of the Carmanah Board of Directors in order to pursue this opportunity.

Under the agreement, Dr. Green, through an incorporated company controlled by him, will pay a combined total of approximately $2M for the shares of CSI and for repayment of CSI's inter-company debt to Carmanah Technologies Corporation. The deal includes a combination of cash payments and a common share buy-back by Carmanah of approximately 1 million of the Company's shares owned by Dr. Green. These common shares will be returned to Treasury.Following the transaction, Dr. Green will maintain an equity position in Carmanah, representing approximately 3% of the total common shares outstanding.Green founded Carmanah in 1995, becoming Chairman when the Company went public in 2000. He resigned as Chairman in May, 2009, but stayed on the Board to assist the new Chairman with the transition into his new role. According to Dr. Green, he looks forward to retiring from the Board to pursue this private business venture, confident that Carmanah's strategic growth plan is in capable hands.

the illumination market in Asia will be one of the fastest growing segments

Producing 5000 lumens, the fixture provides excellent color rendering, a brilliant white color temperature and low glare. In addition, the Generation Bi-level Switching option provides a uniform 50% power reduction while closely maintaining critical-to-safety site lighting uniformity levels.

The Generation Series LED Luminaire incorporates a unique House Side/Street Side dimming option that allows independent operation of the house side and the street side of the distribution. This reduces the light level on the house side of the fixture by roughly 40% and results in a further 50% savings in energy consumption when dimmed.

Philips Lumileds today announced Alvin Tse, a fifteen-year veteran of the lighting industry, has joined the company as its Vice President of Sales in Asia Pacific. Mr. Tse will lead its growing team of technical, marketing and sales professionals in the region which is widely expected to be among the fastest growing for solid-state lighting adoption.

In the coming three years it’s expected that the illumination market in Asia will be one of the fastest growing segments and at a rate that exceeds other regions. According to Mr. Tse, “Those companies that can develop the entire LED, from Epi through packaging, and posses the manufacturing capability to deliver the reliability and quality of light required in mass volume, will succeed and lead the transition from conventional to solid-state illumination.”

Mr. Tse began his career at Philips Lighting, where he was responsible for the professional lighting business in Hong Kong and South China. He has also held various positions in sales management, product marketing and business development in solid-state lighting, and most recently ran the global marketing and sales for Light Engine Ltd. (formally Cotco). Mr. Tse also holds a Bachelor’s degree in Electrical and Electronic Engineering from the University of Melbourne, Australia, and a MBA from the University of South Australia.

LED's long lifetime performance requires careful design

LEDs are inherently durable and long-lasting components. However, achieving the LED's long lifetime performance requires careful design and testing of the electronic power and control systems and the thermal network. The extensive characterization and reliability testing that OptoElectronix incorporates into every product is the result of its extensive experience in LED and semiconductor technology product development and manufacturing.OptoElectronix estimates that the solid-state lighting (SSL) light engine market, which includes the LEDs, thermal network, power driver circuitry, and optics -- all incorporated into one module -- will be approximately $5.516 billion in 2012.

 The application circuit with BCR 450 has low component count and is free of inductors, capacitors and free-wheeling diode resulting in a very small PCB space requirement. This includes the elimination of electrolytic capacitors which limit the lifetime of switch-mode driver solutions. Infineon also implemented an effective thermal shut down feature and over-voltage as well as over-current protection into the device.

Additionally, the BCR 450 with its output current precision varying only +/-10 percent over the entire operating temperature range strongly supports the homogenous light output requirement for LED lighting fixtures.The world’s largest semiconductor maker has undergone a worst profit drop in seven years in the global recession. Chang said that the company could start out first purchasing a small company, and use that as a nucleus for growth. The company is considering buying companies in solar and LED sections. Chang didn’t identify any acquisition targets or specify investment amounts.

the low profile laydown style

The LED Vantage ?, contains sophisticated processors and regulators to ensure that the color and power of the light remains consistent, according to the company. The LED Vantage is custom made to fit inside of any showcase and is secured to the case using Econo-Lite’s patented spring loaded technology which allows installation in just a few minutes.

 The new Genesis II LED Tail lights are unique due to their oval board shape which features 120 second generation Genesis LEDs, according to the company. The unique shape allows the board to be set deep inside the reflector to give the maximum light output. The Lights are avaliable in mutiple models including a smoked or red lens as well as the stock squareback style or the low profile laydown style.

The company also offers the option of a black reflecter as opposed to a chrome reflecter on the smoked laydown models. This feature provides a blacked out effect that looks more natural, especially on black and silver bikes, than a stock taill light does.

The new Genesis? II LED product line is not limited to Harley Davidsons?, it will also include Metric, Sportbike and Goldwing? motorcycle products. These units have a suggested retail price of $139.95 and $149.95 depending on the model.

an innovator of intelligent LED lighting systems and technologies, today announced that it has retained Associated Component Sales (ACS) of Atlanta, Georgia to represent its line of LED products throughout the United States and Canada.

lighting design dictates an even wash of light

LFI's 20th anniversary spotlighted two spectacular keynote luncheons during the Daylighting Institute and the LIGHTFAIR Institute. Ed Begley Jr. spoke on Sunday, May 3 and James Turrell on Monday, May 4. Topics addressed during each luncheon included sustainability and light as art and inspiration. Both luncheons individually attracted a packed house of attendees.

Evluma developed the new wide optic version of the 40W Clearlight as a companion to its existing narrow optic, or lambertian luminaire. Both luminaries are designed for use in 50-175W Mercury Vapor (MV), or 70-150W High Pressure Sodium (HPS) mogul base, dusk-till-dawn fixtures. With peak intensity vertical angle of 0o, the narrow optic Clearlight is recommended for areas over doorways or loading docks where more light is required directly under the fixture. The wide optic is recommended for parking lots and roadways, anywhere lighting design dictates an even wash of light, says the company.

The Clearlight contains no mercury, and is dark-sky friendly with full cut off; the highest percentage of lamp lumens falling in the 0o-60o zone for both models. With an overall projected life-time well beyond an L70 of 70,000 hours, the Clearlight requires very little maintenance compared to legacy HPS and MV, according to the company. Evluma distributors are currently taking orders for the new Clearlight 40W Wide Optic LED luminaries with stock available mid-August, 2009.

LED light engine manufacturer, today announced a five-year (or 35,000-hour, whichever comes first) warranty on their complete line of LED Universal Light Engine(TM) products. These light engines provide full plug-and-play functionality, making it simple for designers to incorporate solid-state lighting into a wide variety of existing and new luminaires. OptoElectronix Universal Light Engines include the LED, a thermal network, optics, the electronic driving system for the LEDs, and a range of control functions. The warranty is effective as of August 1, 2009.

through intelligent control using advanced digital signal processing

The research greenhouse contains three movable tables. By using cameras the tests can be followed online. "At the moment it is just too expensive to replace the SON-T completely with LED-lighting, but this greenhouse offers the possiblity to research the optimal growing recipe. For the growers we remove the so called hordes so that in the future they can start with a basic recipe.We want to keep the cultivation affordable and innovative", decided Jaco Dijkshoorn from BVB Substrates. "With BVB and Philips - who have been around for more than a hundred years - we want to guarentee the future of cultivation. We have a lot of faith in it!"

The charter of the joint team is to develop innovative control ICs both for conventional light sources, such as fluorescent or HID lamps, and for emerging LEDs. These devices will ensure the optimal control and regulation of light sources, at the same time maximising their service life and, through intelligent control using advanced digital signal processing, will be fundamental in minimising energy consumption. The move will also further enhance the patent and intellectual property portfolio of the companies in the field of state of the art lighting control and semiconductor process technology.

"Semiconductors play an important role in improving power efficiencies, in reducing global energy consumption and in environmental sustainability," said Dr Jalal Bagherli, CEO of Dialog Semiconductor. "The lighting industry is going through a period of rapid technological change. In establishing this partnership, I am delighted to be bringing our relationship with this industry leader to the next level as we together leverage our expertise to create the most power-efficient lighting systems possible.

the LED High Bay fixture is completely free of hazardous materials

Additionally, the educational program, which started two days before the trade show floor opened with the Daylighting and LIGHTFAIR Institutes, offered the largest, most diverse courses and seminars to date with more than 220 hours of programming over five days. This year, 136 industry experts presented 75 sessions, addressing topics that covered lighting fundamentals, software, applications, controls and solutions, as well as design innovation, sustainability, energy-efficiency, product updates and case studies.

LFI's 20th anniversary spotlighted two spectacular keynote luncheons during the Daylighting Institute and the LIGHTFAIR Institute. Ed Begley Jr. spoke on Sunday, May 3 and James Turrell on Monday, May 4. Topics addressed during each luncheon included sustainability and light as art and inspiration. Both luncheons individually attracted a packed house of attendees.

Operating on just 150 watts, the powder-coated aluminum SafeSite? High Bay luminaire is designed to perform for 10+ years in even the most demanding applications - three times as long as traditional HID fixtures, and nearly twice as long as fluorescent solutions. Environmentally, the LED High Bay fixture is completely free of hazardous materials, including mercury, and boasts an annual energy savings that equates to over two metric tons of C02 saved per fixture per year. In a 1,000 fixture retrofit, that’s equivalent to 347 cars off the road and over 19,000 mg of mercury saved annually.

Weighing in at less than fifteen pounds, half the weight of a conventional fixture, the SafeSite? High Bay’s low-profile housing is designed to pair seamlessly with a full range of mounting options offered by Dialight. Combined with a rugged solid-state design that makes the luminaire resistant to shock and vibration, users are presented with a high level of versatility and reliability matched by the luminaire’s superior ease of installation.

light source with exceptional appearance

Renaissance Lighting is a global leader in the development of next-generation solid-state architectural downlights and controls, the result of on-going breakthroughs in the application of LED technology and Constructive Occlusion?, a patented technology for the unique mixing and blending of multiple LED light sources. The company’s innovation and unrelenting commitment to green technology are key forces driving the development of highly creative lighting products that deliver the solid-state industry’s purest light source with exceptional appearance, superior efficiency and glare-free illumination for all architectural applications. Headquartered in Herndon, Virginia, USA, Renaissance Lighting deploys a revolutionary approach to product engineering and design that is supported by 30 patents including its optical and feedback control technologies.

From a driving current of just 250mA the new TL12W02-N neutral white LED and TL12W02-L warm white LEDs offer high typical luminous flux ratings of 90 lumens and 60 lumens respectively. Both devices will operate over a wide temperature range of -40oC to 100 oC, making them ideal for harsh industrial environments and outdoor lighting designs.The TL12W02-N and TL12W02-L are supplied in miniature surface mount packages measuring just 10.5mm x 5mm x 2.1mm. Designed to ensure low thermal resistance, the package technology provides improved heat dissipation characteristics and helps simplify thermal management in lighting designs based on the new LEDs.

The aim of the “LED – Emotionalize your light” competition is to develop viable lighting solutions that users can afford and are easy to operate and install. A total of 530 ideas from 86 countries have been entered in the competition at www.yahamlighting.com. Using application scenarios, graphic designs and technical specifications the participants presented their creations to around 800 community members and the professional jury of senior OSRAM staff and selected media and design experts.

market products for customers in a broad array of industries including automotive

The same board-mount connector is used for both board-to-board and wire-to-board connectivity. The hermaphroditic design results in only one board-mount part needing to be inventoried and simplifies design by using the same footprint on both ends of the strip. Contacts are supplied in reeled form for processing by high-speed terminating equipment.

Tyco Electronics Ltd. is a leading global provider of engineered electronic components, network solutions, undersea telecommunication systems, wireless systems and specialty products, with fiscal 2008 sales of $14.8 billion to customers in more than 150 countries. We design, manufacture and market products for customers in a broad array of industries including automotive; data communication systems and consumer electronics; telecommunications; aerospace, defense and marine; medical; alternative energy and lighting; and public safety communications. With approximately 7,000 engineers and worldwide manufacturing, sales and customer service capabilities, Tyco Electronics' commitment is our customers' advantage.

Luna Road, in conjunction with the road authorities in Costa Rica, has installed Luna Road Lights on the dangerous roads and curves leading up to the treacherous Tunnel Zurqui in a bid to help increase road safety, and help reduce the number of road accidents and fatalities at this particular death trap.

The LR-200 Luna Road Light Series was the major model used on this particular project.  Each LR-200 Luna Road Light Series was installed in the foundation of the road, creating a flushed finish effect.

LED detection to shut down open channels

YAHAM LED driver IC is ideal for backlighting control in mobile devices. The 3P3208 features 16 programmable current levels with single wire pulse control, dual-mode 1X, 1.5X, charge pump for maximum efficiency and VF coverage, small application circuit, and no need for extra resistors for current settings. In addition, it provides automatic LED detection to shut down open channels, built-in thermal protection, proprietary current regulation topology, no inductors, low noise operation, 1MHz constant switching frequency, and the smallest package size (2.85x3mm) available.

We found Tower's power management process to be ideal for LED driver ICs as it includes an industry first scalable Rdson versus breakdown voltage design kit technology to reduce on-resistance and size of power cells," said Dr. Zhixu Zhou, President of 3PEAKIC Microelectronics Inc. "Tower has been instrumental in offering excellent process technology and customer support in manufacturing our wafers and also working with us to develop and win the market."

"3PEAKIC's choice to manufacture its devices at Tower's fab in Israel instead of a facility in closer proximity to China is a testament to our unparalleled design enablement capabilities and superior process technologies," said Dr. Avi Strum, Vice President and General Manager of Tower's Specialty Business Unit at Tower Semiconductor. "We seek to align our capabilities with customers that target the green energy sector and are pleased with the opportunity to produce energy saving devices such as 3PEAKIC's LED driver ICs."

Neither of the new LED lamps contains lead or mercury

Just like its 10-watt cousin, the GE 7-watt LED lamp helps customers excel at cutting energy costs. It reduces energy consumption by 77 percent when compared with standard 30-watt incandescent R20 reflectors and, if you can reduce your light levels, you can save even more compared with halogen 50-watt PAR20 lamps over 20,000 hours. The 7-watt GE LED lamps have a 20,000-hour rated life to 70 percent of initial light output, so fewer lamp replacements are needed versus standard halogen or incandescent light sources. It features an 82 CRI and is available in both 2700K and 3000K, attributes that allow it to provide crisp, halogen-like color.

Neither of the new LED lamps contains lead or mercury. Both are RoHS compliant.YAHAM is one of the world’s largest LED systems companies. Its expansive installed base of white LED systems in the United States includes Walmart’s refrigerated display case lighting installation, the world’s biggest white-LEDs-replacing-fluorescent lighting retrofit in a retail display setting. Globally, GE has sold over 500,000 LED refrigerated lighting case lights, over 5 million LED traffic signals and over 14 million linear feet of Tetra? LED lighting systems for use in signage and architectural applications. Over 50 percent of GE’s lighting research is devoted to LEDs (light-emitting diodes) and OLEDs.

GE Consumer & Industrial spans the globe as an industry leader in major appliances, lighting and integrated industrial equipment, systems and services. Providing solutions for commercial, industrial and residential use in more than 100 countries, GE Consumer & Industrial uses innovative technologies and ecomaginationSM, a GE initiative to aggressively bring to market new technologies that help customers and consumers meet pressing environmental challenges, to deliver comfort, convenience and electrical protection and control.

the LED is a key to its growing popularity

The LEDtronics LED48T8 tubes comply with RoHS—the lead-free and mercury-free directive, as well as the CE safety assurance. They emit no infrared or ultraviolet radiation, and effectively reduce light pollution, being compatible with the international “dark skies” initiative.Founded in 1983, LEDtronics leads where others only follow when it comes to designing, manufacturing and packaging state-of-the-art LEDs to meet the world’s constantly changing lighting needs. Our inventive product line encompasses an array of direct incandescent lamp replacement Based LEDs, low-cost snap-in and relampable Panel Mount LEDs, high intensity sunlight-visible Discrete LEDs, PCB LEDs circuit board status indicators, surface mount diodes SMT LEDs, full-spectrum rainbow RGB LEDs and Infra-Red (IR) LEDs.

Several trends have boosted the popularity of these electronic lights, according to automotive engineers. A few LED products now offer 50 lumens/W – in some cases as much as 100 – whereas many products a few years ago offered less than five. Additionally, electric vehicles and hybrids need power-efficient lighting, which boosts the appeal of LEDs. Meanwhile, the cost of LEDs has gradually dropped over the last five years.Less than 2 percent of headlights are estimated to use LED technology today. But suppliers say that more than 80 percent of Asian cars use LED-based CHMSLs. Similarly, more than 70 percent of European cars and about half of North American cars are employing LED-based CHMSLs. On the exterior of the vehicle, LEDs are also used in daytime running lamps and parking lights, as well as the high- and low-beam headlights.

Tier-one suppliers say the design flexibility of the LED is a key to its growing popularity. LED packages can be altered to incorporate different numbers of chips, as well as different shapes and sizes. Automakers such as Cadillac, for example, have used that flexibility to create unusually shaped CHMSLs and tail lamps.In that sense, LEDs are helping automakers create greater brand awareness, in the interior, as well as the car's exterior. yaham, for example, has rolled out LEDs of various colors – including ice blue, blue lagoon, sky blue and blue green – which enable automakers to tune the interior color to match their brand. In an even bolder step, Ford is employing the technology in MyColor, a system that allows drivers to change the interior colors to match their moods.

Future Lighting Solutions is a provider of LED lighting components

Future Lighting Solutions supplied the LUXEON LEDs from Philips Lumileds as well as tools and services to help ensure color uniformity in the LEDs themselves. Proprietary Future tools were used to calculate the achievable chromaticity coordinates and thereby determine which color bins were required to produce the required color values. Future’s binning program then ensured that every balloon would be illuminated by LEDs from the same bin of each color in Future’s managed inventory.

The LED modules were designed and manufactured by MAL Effekt, a German-based Future Lighting Solutions Integration Network Member, and mounted on aluminum tubes inserted into each balloon. MAL Effekt also developed a custom DMX512 Power module that was used drive the LEDs, generate the desired colors, and control both color point and brightness via pulse width modulation (PWM).

MAZeT GmbH, another Future Lighting Solutions partner, supplied color sensors that monitored the color produced by the RGB modules and sent the information from a central DMX512 control panel to a custom MAZeT electronic for any necessary adjustments to ensure the homogeneity of color tones from balloon to balloon. The JENCOLOR color sensors were developed by MAZeT and manufactured by JENOPTIK.Future Lighting Solutions is a provider of LED lighting components and support services for solid-state lighting products and installations, including engineering expertise, concept development, full system solutions and online tools that accelerate quality application development. The company is a division of Future Electronics.

it is Energy Star qualified without the product being approved

Making any statements or suggestions in product literature or websites that a product meets any or all of the Energy Star requirements or that it is Energy Star qualified without the product being approved and listed on the qualified product list(s) posted on the Energy Star Web site.

Leaman takes the helm of a leading innovator of solid-state and conventional lighting technologies. Under Jerabek’s leadership, OSRAM SYLVANIA rose to its current position as North America’s number one lighting supplier, with sales of 1.75 billion Euros in fiscal year 2008.

"I am delighted that Rick Leaman has been chosen to succeed me,” said Jerabek. “Rick's strong operational background especially in the turbulent automotive industry has prepared him well to continue steering our leadership position in traditional lighting technologies while successfully transitioning to solid state lighting. I am also pleased to take on a new role as vice chairman, providing both industry and customer support for OSRAM SYLVANIA that complements Rick's role as CEO."

Leaman will serve as chief executive for OSRAM SYLVANIA’s consumer lighting, professional lighting and specialty lighting business units in Canada, Mexico and the United States. He will also serve as a member of the OSRAM SYLVANIA board of directors.

“It is an honor to have the opportunity to lead OSRAM SYLVANIA into a new era of innovation,” said Leaman. “Our organization has unmatched lighting expertise and will lead the transition to energy-saving lighting in homes, businesses and vehicles across North America.”

Jerabek will continue as a member of the OSRAM SYLVANIA board of directors and support the company in legislative activities and industry associations such as the National Electrical Manufacturers Association (NEMA) and the National Association of Electrical Distributors (NAED).

business development strategies for technology companies

Prior to joining Luminus Devices, Lawson was Vice President of Marketing and Business Development at BTU International, where he was responsible for the development and growth of the solar energy business. Before this, Lawson headed up SD Lawson and Associates, a strategic consulting firm focused on product, market and business development strategies for technology companies. In addition, Lawson has held senior level positions with PRI Automation, Inc. and Digital Equipment Corporation. Lawson began his career as a process sustaining engineer at Intel Corporation.Luminus says that its PhatLight LEDs are ideal for UV curing applications as Luminus products produce irradiance levels comparable to current and older technology UV sources, mercury lamps. LED-based UV curing offers significantly long life and dramatic reduction in cost of ownership of these technically advanced systems. Also, LED-based UV curing is a green technology that reduces both electrical consumption and emissions.

“This is an exciting time to join Luminus Devices as the company enters its next stage of growth and I look forward to building momentum in the UV curing market,” said Lawson. “The UV lighting market will contribute greatly to the company’s overall growth strategy.Luminus Devices, Inc. develops and manufactures high performance solid-state light sources – PhlatLight LEDs – for the general illumination-lighting, projection display, and UV curing market segments. Holder of extensive intellectual property and over 150 issued and pending worldwide patents for big LED technology, Luminus Devices headquarters is located in Billerica, MA with domestic manufacturing also in Billerica and Woburn, MA, and global manufacturing in Taiwan and Thailand.

The new range uses a new design to ensure that high directional light levels are produced from a small array of LEDs consuming tiny amounts of electrical power, according to the company. For example a newly launched 7 Watt Megaman LED Reflector produces the light equivalent of a traditional 35 Watt halogen spotlight. These lamps also have a rated life of around 20,000 hours, far exceeding both conventional (incandescent) and halogen lamps.Based on over 10 years of research and development, these ground-breaking lamps are a direct one-for-one replacement for halogen spots in terms of both colour temperature and intensity, but with energy savings of up to 80%. The new range looks set to become a benchmark for interior and lighting designers, as it represents a significant leap forward in current LED lamp performance.

These new age lighting innovations are designed to give higher efficiency

These new age lighting innovations are designed to give higher efficiency and consume low power and has environment friendly luminous source, which make it the best in LED lighting category.Endura Lite is suitable to be used in spaces like, Jewellery Mart, Designer Showrooms, Recreational Areas, High-end specialty shops, Auditoriums, Theaters, Art Galleries and Museums, Endura Lite transforms the look of an ordinary space into an extraordinary one. The exclusive range is available in 3x1w and 1x3w with two colors i.e. Day light white and warm white.Havells India Ltd is a billion-dollar-plus organization, and is one of the largest & India's fastest growing electrical and power distribution equipment manufacturer with products ranging from Industrial & Domestic Circuit Protection Switchgear, Cables & Wires, Motors, Fans, Power Capacitors, CFL Lamps, Luminaires for Domestic, Commercial & Industrial applications, Modular Switches, & Bathfittings covering the entire gamut of household, commercial and industrial electrical needs.

The high-power stage lighting market is seeking more beneficial alternatives to traditional halogen or high-intensity discharge lighting, and LEDs are increasingly being used for staging events, Osram says. Osram is highlighting its portfolio of LEDs (including OSTAR SMT, Diamond DRAGON and Golden DRAGON Plus LEDs - exhibited at the China PALM Expo for professional audio light music technology in Beijing on 28-31 May), which provide efficiency, high brightness and long lifetime for such a demanding environment. Osram Opto says that its LEDs can provide multiple lighting colors (red, green, blue), allowing greater range and variability in lighting options, and can achieve a greater color range through adjusting the intensity of each LED color group.

The OSTAR SMT LED unites power efficiency and RGB color mixing capabilities in a compact surface mountable package. The Diamond DRAGON is Osram’s brightest single-chip LED, with a comprehensive range of colors. The Golden DRAGON Plus is another alternative for a stage illumination light source. Its long lifetime of more than 50,000 hours (depending on conditions), and its feature of emitting light from the smallest possible source using Osram Opto’s Thinfilm/ThinGaN technologies, enable lighting designers to generate new applications, says the firm.We chose the Diamond DRAGON RGB LEDs for our intelligent wash light because we wanted to offer a high-brightness, long-lifetime solution that meets the needs of the high-power stage lighting market,” says PR Lighting's Steve Tulk chief engineer. “This XLED 590, with Osram’s LED, is the brightest intelligent wash light in the market,” he claims. Light output is greater than a conventional 1200W wash light. PR Lighting exhibited more than 20 Diamond DRAGON RGB LED-based wash lights at the China PALM Expo.

when teamed with applications in the projection ledlighting

Who is also the inventor of Premien technology, said: "Manufacturers of projectors which utilize conventional lamps can readily convert to Premien LED technology, with minimal design changes and a low additional investment in tooling. This can allow the introduction of LED projectors into multiple markets quickly, which was not possible using previous configurations." Dr. Li added: "Premien LED technology will enable the introduction of compact, low-cost, long-life, low-maintenance led high bay light for gaming, home theatre, mobile presentation and small office markets.Wavien, based in Valencia, California, USA, is a technology licensing company developing long-life high-performance light sources and engine prototypes for the projection and general lighting industries.Wavien currently offers its unique "Dual Paraboloid Reflector" ("DPR") technology using ultra-high-pressure arc lamps. Wavien is now entering the LED illumination market with its "Premien" recycling and non-imaging optical technology. These technologies improve lamp life, brightness, and efficiency when teamed with applications in the projection ledlighting, fiber optics, entertainment, and general lighting markets.

LED lighting-based applications for greenhouse-based flower and vegetable cultivation. The two companies have signed a memorandum-of-understanding for combining their respective strengths in the development.In high-tech horticulture production process which is highly energy-dependent, specialist ‘growth’ lighting is required to improve crop quality and output, especially during autumn and winter. The two companies will identify applications of energy-efficient LED lighting to lower this energy consumption, while at the same time improving the quality and yield of production. The corporate brand name of Bas van Buuren B.V., Euroveen B.V and Bogro B.V. - has more than 100 years of experience of driving innovation in substrates, the foundation from which flowers, vegetables, plants, mushrooms, soft fruits and trees are grown. Based in the Netherlands, one of the world’s largest flower-producing economies, BVB Substrates supplies its expertise in substrates to nurseries throughout the world.

FlexDOT is a string of super bright (RGB) LEDs designed for a variety of dynamic lighting applications including video and other entertainment displays. Leveraging the DMX512 lighting control protocol, each LED capsule on the string produces a wide color palette of millions of hues. This allows the user to create a personalized interactive experience through color control, special effects and animation of each light point. The FlexDOT has up to 30-frames-per-second speed, which is ideal for fast-moving video applications.